Tascam US-1x2 USB Audio/MIDI Interface with Microphone Preamps iOS Compatibility

TASCAM's Ultra-HDDA (High Definition Discrete Architecture) mic preamp design is based on discrete components, just like classic professional gear. They achieve an incredible EIN rating of –125 dBu, meaning their noise level is practically below the range of hearing. Other impressive specs include a signal-to-noise ratio of 101 dB, out-speccing anything in its price range. But instead of judging the design merely by test measurements, key components were selected following extensive listening tests.

The mic input features a professional XLR connector, which supplies +48V phantom power for condenser microphones. Built from heavy duty metal throughout, the US-1x2 stays put even when moving mics around and changing connections.

The combo input jack includes TRS inputs for balanced line-level signals from professional processors and synthesizers. Finally, the two inputs can be switched to high-impedance for direct recording of electric guitar and bass. (Only the XLR or 1/4" input can be used, not both at the same time.)

Wide Gain Range Supports Dynamic and Ribbon Microphones

Non-powered mics like dynamic and ribbon designs can sound great, but they also have a lower output level than condenser microphones. The US-1x2's Ultra HDDA mic preamps not only feature 57dB of gain, but also a low-noise design so you don't crank up the noise at the same time. Plug in modern or classic mics and still get plenty of level on your tracks.