Hifonics A1000.2D Alpha Series Compact 1000 Watt 2-Channel Class-D Car Amplifier

LOW NOISE PREAMPLIFIER CIRCUITRY

Maximum low voltage signal from the source unit comes into the amplifier through a low voltage circuit which delivers minimal distortion through the amplification process

RCA INPUTS

Nickel plated RCA connectors for audiophile signal quality and maximum signal throughput with minimum distortion and maximum external noise rejection

OPERATION MODE

Flexible installation allows this amplifier to run in either two channel or bridged mono mode

CROSSOVER TYPE

Accu-Cross crossovers allow for complete control of the signal directing to all speakers. See specifications section for specific frequencies

ELECTRONIC EQUALIZER

Control of amplifier output with on board electronic crossover to tailor specific frequencies to speakers and subwoofers. Check specifications for specific frequencies for this amplifier

CLASS / TOPOLOGY

Developed over 4 decades of engineering to deliver the highest level of sound quality and power efficiency, Hifonics ALPHA Full Range Super D-Class® circuitry results in lower distortion, higher current efficiencies and while producing less heat than conventional amplifier designs

OUTPUT DEVICE TECHNOLOGY

The Ultra-Fi™ MOSFET is designed for music production vs just electronics output power. It produces very musical high power with high efficiency for cooling and minimal distortion

HEAT SINK

Heavy duty aluminum alloy heat-sink efficiently moves heat from the MOSFET where it can be cooled

POWER SUPPLY

The Twin Turbo Coil PS is a Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices

OUTPUT CONNECTIONS

Nickel plated, high temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant

CONNECTION TYPE

Secure connection for all power, ground and speaker connections. Angled for ease of access during installation.

LED SYSTEM PROTECTION CIRCUITRY DIAGNOSTICS

Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel

SIGNAL SENSE TURN-ON

The amplifier detects a voltage rise (6 volts) with a "DC Offset" over the connected input signal on the HIGH LEVEL INPUTS when the head unit or source unit is switched on. Thus, the amplifier will also be turned on. When the source unit is turn off the amplifier is also turned off. Using this feature eliminates the need to use the REM (turn on wire)

The AUTO TURN-ON function will work with 90% of all source units because they are equipped with "high power" output. Only a few older head units will not use this function

FULL RANGE DIGITAL

Full Range Super D-Class® circuitry delivers high efficiency/high power technology to deliver maximum wattage. With this focus on engineering, ALPHA delivers big sound while remaining very musical in a compact chassis is the result.

SMT INSIDE

With Surface Mount Technology the typical "through-hole" placement and the larger tolerances from human placement is dramatically improved. In addition, circuit engineers can design better circuits for power and sound quality as the tolerances of SMT components are superior to larger "through-hole" components.

Because of their lower mass SMT components withstand shock and vibration making them perfect for audio designed for all vehicles.

300KHZ HIGH SPEED PULSING

The switching speed of the Class D chip puts the amplifier sampling frequencies at over 100 times higher than human ears can hear. This means that the amplifier and the very fast digital switching remains un-hearable in the audio bandwidth for music.

CLASS : Full Range Super D-Class®

TOTAL CHANNELS : 2

POWER @ 2 OHMS : 2 x 500 Watts

POWER @ 4 OHMS: 2 x 250 Watts

MONO BRIDGED @ 4 OHMS: 1 x 1000 Watts

CROSSOVER : Switched

TONE CONTROL/PARAMETRIC EQ : Bass EQ

BASS BOOST: 0~12dB@45Hz

VARIABLE VOLTAGE : 200mV - 10V

SIGNAL TO NOISE: >85dB

FREQUENCY RESPONSE: 10Hz - 45kHz

TOTAL HARMONIC DISTORTION (THD): <0.05%

SPEAKER LEVEL AUDIO INPUTS : Yes

POWER TERMINAL 12V/GND: 10 AWG

SPEAKER TERMINAL WIRE GAUGE : 18 AWG

FUSING : Use Extermal Fuse

TURN ON CIRCUIT " Switched

HEATSINK SIZE " Length: 9.25in x Depth: 5.75in x Height: 2.37in